LOADING IMAGES
CM510-76F
Product Features
Model No. | Network | Item | Interface | Dimension |
CM510-76F | 4G LTE-FDD | DTU | 2 serial ports (RS232/RS485 (optional)) serial port format: 5-pin 2.54mm + 3-pin 2.54mm | 65*65*18mm |
1. Dedicated for power hood FTU, supporting power protocol
Power-level design, supports IEC101/104 power protocol, supports single-center TCP/UDP/DCUDP transparent data transmission, and can seamlessly connect to various power master station platforms.
2. Embedded design, small size
Meet the structural requirements of power distribution network automation equipment. Dual serial port design, configurable serial port DEBUG mode and communication mode, support online debugging, log storage, historical log information retrieval.
3. FCC and CE approved, strong anti-interference, stable transmission
4. Intelligent anti-dropping.
Support online detection, online maintenance, automatic redial when disconnected, to ensure that the device is always online
5. Three-tier system protection: On the basis of the original two-level (software protection + CPU built-in watchdog WDT protection) system protection, a first-level system virtual guard VWM (Virtual Man Watch) detection and protection function is added to ensure the system is stable and reliable
6. Support 5G, China Southern Grid/State Grid hardware encryption, power 1.4/1.8GHz private network
Technical Parameter
CM510-76F | |
Serial Port | Data bits: 8 bits Stop bits: 1, 1.5, 2 bits Parity: no parity, odd parity, even parity Serial port rate: 300bps ~ 115200bps Flow control bit: no flow control |
Indicator Light | can indicate signal value, fault, online status |
Antenna Interface | Standard SMA female antenna interface, characteristic impedance 50 ohm; 3M/5M/10M/15M antenna extension cable can be selected to meet the needs of different applications |
SIM/UIM | 1.8V/3V/5V standard push rod user card interface, built-in 15KV ESD protection |
Power Interface | Standard 3-pin locomotive power socket |
Powered By | |
Item | Description |
Recommended Power Supply | DC9V/1500mA |
Operating Voltage | DC7V - DC32V |
Power Comsumption | |
Item | Description |
Average Communication Current | 60mA@+12VDC |
Standby Current | 25mA@+12VDC |
Hibernation Current | |
Physical Characterisitics | |
Item | Description |
Shell | Adopt metal shell, anti-radiation, anti-interference; shell and system safety isolation, lightning protection design; in line with the electrical safety requirements; protection level is IP41; particularly suit for harsh industrial control environments. |
Dimension | 100x62x24 mm(not including the antenna and the fixed parts) |
Weight | 298x226x60mm (Subject to actual Model No.) |
Other Parameters | |
Item | Description |
Operating Temperature | -30ºC ~+75ºC |
Storage Temperature | -45ºC ~+90ºC |
Relative Humidity | 95%(No condensation) |
Product Size
Selection Guide
Model NO. | CM510-76F |
Standards and Frequency Bands | LTE FDD:B1/B3 LTE TDD:B39/B40/B41 TD-SCDMA:B34/B39 WCDMA:B1 CDMA2000 1X/EVDO:B5 GSM/GPRS/EDGE:B3/B8 |
The theory of bandwidth |
|
Transmit Power | <24dBm |
Receiver Sensitivity | <-109dBm |
Application Scheme
▋Detection industry applications (pollution, meteorology, water pattern, water conservancy, earthquake, etc.)
▋ Network management monitoring industry applications (gas pipe network, oil pipe network, heating network monitoring, water pipe network monitoring, etc.)
▋ Oilfield monitoring, street light control, traffic control, vehicle guidance
▋Application cases in the power industry (power distribution monitoring, grid automation, automatic meter reading, grid dispatching)
